Remote Control Mowbot Explained - used Sabertooth Dual 25A Motor Driver for R/C

This video show method, that Lee Evan used building remote control for robot.

This below discription of Sabertooth Dual 25A Motor Driver for R/C

Specification

• 25A continuous, 50A peak per channel.
• 6-24V nominal, 30V absolute maximum?
• Synchronous regenerative drive
• Ultra-sonic switching frequency
• Thermal and overcurrent protection
• Lithium protection mode?
• Input modes: Analog, R/C, simplified serial, packetized serial
• Size: 2.6” x 3.2” x .8”
• 65 x 80 x 20 mm

Current Price: $ 187.50

Goal Zero 19011 Guide 10 Black/Silver Small Battery Power Pack

Goal Zero's lightest, most portable USB solar recharging kit with 3.5 Watts of sun collection power. This Nomad 3.5 solar panel will charge the guide 10 plus battery pack in about 6-8 hours. You can also recharge your guide 10 plus power pack from a laptop. Plug in any of your small USB powered devices to the guide 10 plus battery pack to recharge them anywhere. Powerful enough to handle smartphones, readers and tablets. kit includes four rechargeable AA batteries. The handy and bright built-in LED light is always with you on the top of the battery pack. Can be used to find things in your dark backpack or purse. The light runs for over 150 hours before needing a charge. When folded up, the Nomad 3.5 is about the size of a wallet. It can open up and charge from your dashboard or hang from a backpack. The convenient zippered pouch pocket on the back of the panel to store the battery pack while charging up or keeping pack and cord neatly organized.

• Keep your power hungry phone juiced and ready for you to use
• Power up your tablet for 25 percent longer
• Never buy batteries again and recharge up the AA or AAA batteries right from the sun
• Handy built in LED flashlight to help you search in that dark backpack or purse
• AA rechargeable batteries included

List Price: $ 129.99

Current Price: $ 89.99

Compact Fluorescent Outdoor PAR38 Reflector, Green

Compact Fluorescent Outdoor PAR38 Reflector, Green

Current Price: $ 85.34

Sabertooth Dual 12A Motor Driver for R/C

Sabertooth 2X12 R/C is a dual motor driver specifically optimized for use in radio controlled vehicles. It is suitable for medium powered robots, cars and boats. Out of the box, it can supply two DC brushed motors with up to 12A each. Peak currents of 25A are achievable for a few seconds. Overcurrent and thermal protection means you'll never have to worry about killing the driver with accidental stalls or by hooking up too big a motor. This special R/C edition of our motor driver comes with options for exponential control, autocalibration and built-in mixing. The operating mode is set with the onboard DIP switches so there are no jumpers to lose. Sabertooth is the first synchronous regenerative motor driver in its class. The regenerative topology means that your batteries get recharged whenever you command your robot to slow down or reverse. Sabertooth also allows you to make very fast stops and reverses - giving your vehicle a quick and nimble edge. Sabertooth has a built in 5V Switching BEC that can provide power to a microcontroller or R/C receiver and a servo or two. The lithium cutoff mode allows Sabertooth to operate safely with lithium ion and lithium polymer battery packs - the highest energy density batteries available. Sabertooth's transistors are switched at ultrasonic speeds (32kHz) for silent operation.

• Up to 24V in: 12A continuous, 25A peak per channel
• 24V in: 10A continuous, 12A continuous with additional heatsinking/airflow, 25A peak per channel
• Synchronous regenerative drive
• Ultra-sonic switching frequency
• Thermal and overcurrent protection, lithium protection mode

List Price: $ 64.99

Current Price: $ 64.99

Dual Digital Display PID Temperature Controller-Great for Sous vide

Key Features of the JLD612 Temperature Controller
3 mode of Auto-Turning with PID AlgorithmsDual Display Setpoint and Current Fahrenheit (F) and Celsius(C)Individually programmable PID control parameters7 Different Dual Output 0.1degree resolution with pt-100 thermocouple

Specification
Power:AC(85V~265V) or DC(85V~360V)
Two display: Setpoint and present temperature
Dual output SSR(8V, 40mA), Relay(3A 120V AC)
Multiple sensor: T,R,J,B,S,K,E,Wre3 ~ Wre25 , PT100, Cu50
Accuracy: 0.2%
Dimension: DIN 1/16
(48mmX48mmX82mm)
(Note: Thermocouple is not included*)

• 3 mode of Auto-Turning with PID Algorithms
• Dual Display for Setpoint & Present
• Support both Fahrenheit (F) and Celsius(C)
• Lower power consumption (less than 3Watt)
• Support SSR or Relay alarm output

Current Price: $ 33.99

Omron's ZEN nano controller - ZEN-10C1DR-D-V2

'A compact solution for small-scale control applications that blends simple, flexible programming and reliable easy performance. Omron's ZEN nano controller offers the ideal mix of flexibility, functionality and cost for a wide range of applications.

Here's Why:

• Combines the Functionality of Separate Timers, Counters and Relays
• Provides Flexible Programming without Rewiring
• AC or DC Inputs with 8 A Relay Outputs
• Offers Multiple Expansion Options for Future Needs
• Exceptional Value for the Cost of Installing Just Three Relays
• Simple Ladder Logic Programming Using ZEN Support Software or Operation Buttons on Front Panel (LCD Models Only)
• Save Time By Using the Memory Cassette to Transfer Programs Between ZEN Units
  
  Features:
• Compact, CPU and Expansion Units
• 8 Timers Support 4 Types of Operation and 3 Timing Ranges Available
• 4 Holding Timers Hold Data During Power Interruptions
• 8 Counters Can Be Switched Between Incremental and Decremental
• 8 Weekly Timers for Day/Time Control
• 8 Calendar Timers for Seasonal Control
• 10 I/O and 20 I/O CPUs Expandable to 34 and 44 I/O
• 16 Holding Bits Retain ON/OFF Status in Case of Power Failure; No Need for Extra Circuitry
• ZEN Battery Provides Controller CPU with 10 Years of Memory Protection
• Accurate Analog Inputs ±1.5% FS
• Flexible Mounting — Either Horizontal or Vertical
• Models with LCD Display Also Feature Real-Time Clock/Calendar and Programming Buttons
• Advanced High-Value Counting with 8-Digit Counter and 8-Digit Comparators, in Addition to 16 Standard Counters
• One 150-Hz High-Speed Counter Available On Models with DC Power Supply
• Twin-Timer Operation Allows You to Set ON and OFF Times Separately, Greatly'

• Price For: (Each) Brand/Series: ZEN Series Communication: RS-485 Current, Input: 4.5 mA Dimensions: 70mmL×56mmW×90mmH Input Type: Voltage IP Rating: IP20 Memory: EEPROM Mounting Type: DIN Rail Number of Inputs: 6 Number of Outputs: 4 Output Type: Relay Primary Type: Controller Standards: UL, cURus, CSA, CE Terminal Type: Terminal Block Termination: Terminal Block
• Type: PLC Voltage, Supply: 12-24 VDC

Current Price: $ 261.29

RHX Solid State Relay SSR-25DA 25A 3-32V DC/24V-380V AC for Temperature Controller

Output voltage: AC 24-380V
Output current: 25A
Input voltage: DC 3-32V
Control Method: DC to AC
Mounting Method: Bolts fixed
Size: 6.3cm x 4.5cm x 2.3cm.
Package Included:
1 x Solid State Relay Controller

• Brand new and high quality
• Long service life and high reliability
• Highly reliable, compact size designed to offer users maximum simplicity
• Fast switching
• Reduced electromagnetic interference

Current Price: $ 7.76

Introduction to Programmable Logic Controllers

Updated to reflect recent industry developments, this edition features practical information on Rockwell Automation's SLC 500 family of PLCs and includes a no-nonsense introduction to RSLogix software and the new ControlLogix PLC. To assist readers in understanding key concepts, the art program has been modernized to include improved illustrations, current manufacturer-specific photos, and actual RSLogix software screens to visibly illustrate essential principles of PLC operation. New material has been added on ControlNet and DeviceNet, and a new chapter on program flow instructions includes updated references to the SLC 500, MicroLogix, and the PLC 5.

• coverage examines how Rockwell Automation's SLC 500 and MicroLogix PLCs work and program, leading to a better understanding of fundamental processes
• a clear-cut orientation to general principles underlying all PLC operations enhances readers' ability to assimilate more advanced concepts and instruction sets in later chapters
• the hands-on Lab Manual, now subtitled "Programming the SLC 500 PLC using RSLogix 500 Software," has been updated to include more information on RSLinx drivers for the MicroLogix as well as a new Ethernet driver configuration lab for the SLC modular processor, the 5/05
• new exercises in the Lab Manual complement the new program flow instructions and take readers through jump to subroutine, jump to label, MCR, and the immediate input instruction
• Chapter 1 Welcome to the World of Programmable Logic Controllers Chapter 2 Micro Programmable Logic Controllers Chapter 3 Programming a Programmable Controller Chapter 4 Number Systems Chapter 5 Introduction to PLC Operation Chapter 6 Introduction to Logic Chapter 7 Input Modules Chapter 8 Output Modules Chapter 9 Putting Together a Modular PLC Chapter 10 PLC Processors Chapter 11 Introduction to ControlNet and DeviceNet Chapter 12 Processor Data Organization Chapter 13 The Basic Relay Instructions Chapter 14 Understanding Relay Instructions and the Programmable Controller Input Modules Chapter 15 Documenting Your PLC System Chapter 16 Timer and Counter Instructions Chapter 17 Comparison and Data-Handling Instructions Chapter 18 Sequencer Instructions Chapter 19 Program Flow Instructions

List Price: $ 231.95

Current Price: $ 70.59

Programmable Logic Controllers-fourth edition

This fourth edition of Programmable Logic Controllers continues to provide an up-to-date introduction to all aspects of PLC programming, installation, and maintaining procedures. No previous knowledge of PLC systems or programming is assumed. As one reviewer of this edition put it "I honestly believe that someone with little or no background to PLC systems could take this book and teach themselves PLCs".

Current Price: $ 74.21

Mad Catz V.7 Keyboard for PC

The Saitek PK17U standard Mad Catz keyboard inherits the great features of its predecessors while bringing even more incredible features, including ergonomically placed Windows and Internet shortcut keys, height adjustment and a removable wrist rest.

• Multi-color Backlighting - Tru-Vu illuminations allow you to set the mood and illuminate your world, mixing shades from Red through Amber to Green.
• Touch-sensitive, backlit dashboard Control Panel - Configure your lighting, media and volume controls with the brush of a finger.
• WASD, cursor, 'Mad Catz' and NumPad keys can be lit independently from the rest of the keyboard to highlight commonly used gaming keys - Set each area to your preferred color or brightness to make the keyboard battle ready.
• Mad Catz Mode - Instantly disable the Windows keys and change the color and brightness of your gaming keys at the touch of a button.
• Pass-through USB, audio and microphone sockets means no more crawling behind your PC to change your USB device or audio configuration. Gold-plated connectors for USB and audio.
• 12 programmable 'Mad Catz' keys - Store your favorite macros for buying equipment, activating abilities or just for initiating your favorite trash talk. Enhanced multiple key presses in gaming areas for complex in-game commands.
• Adjustable gaming keyboard
• Fully programmable with included SST software
• Hard wearing, metal-plated key caps in key gaming areas are designed to withstand the punishment that pro gamers demand.
• Media keys and hard wearing surfaces
• Powerful ST Programming Software - Create profiles for each game that you play in order to save different button configurations.
• Tri-Color Backlighting
• True-Vue Key Illumination

List Price: $ 79.99

Current Price: $ 55.55